HP Fabric Clustering System HP-UX Administrator's Guide, March 2008

Figure 4-6 Attach Rail to Switch
3. Repeat steps Steps 1 and 2 on the other side of the switch.
The two sliding rails should still be unattached.
4. Loosely attach the switch with one screw through the front of each rail.
CAUTION: Temporarily support the switch until the sliding rails are attached.
Figure 4-7 Loosely Attach Rail to Rack
CAUTION: Do not let the switch hang unsupported from only the fixed rail flanges.
5. Fit the sliding rails over the fixed rails with the flanges facing outward until the flanges meet
the rack.
Figure 4-8 Fit Sliding Rail over Fixed Rail
Install HP Fabric Clustering System Switches 43