HP Fabric Clustering System HP-UX Administrator's Guide, March 2008

out-ucast-pkts : 39
out-multicast-pkts : 0
out-broadcast-pkts : 0
out-discards : 0
out-errors : 0
HP-IB>
Defaults: This command has no defaults.
Related Commands: “show interface ib” (page 163)
“show interface ib sm” (page 165)
show interface mgmt-ethernet
Synopsis: The show interface mgmt-ethernet command shows the configuration of
the Ethernet Management port on the system controller.
Syntax: show interface mgmt-ethernet
This command takes no card or port designation.
Command Modes: User-execute and privileged-execute modes.
Privilege Level: General read-only user.
Usage Guidelines: The Ethernet Management port is an Out-of-Band Management (OBM)
port that provides network access to the system chassis in order to run remote CLI and Element
Manager sessions. The port must be configured before it can be used (Element Manager GUI is
not supported in initial release of HP InfiniBand).
This command displays the administrative status of the interface port, its assigned IP address
and subnet mask, plus the IP address of the gateway port used to connect to the Ethernet
Management port. If the Ethernet host is directly connected to the Ethernet Management port,
without having to go through Ethernet switches, the default gateway-addr value is 0.0.0.0 (some
gateway functions are not supported by HP InfiniBand).
Examples:
HP-IB# show interface mgmt-ethernet
===============================================================
Mgmt-Ethernet Information
===============================================================
mac-address : 00:05:ad:00:11:75
auto-negotiate : enabled
admin-status : up
ip-addr : 10.3.102.24
mask : 255.255.0.0
gateway-addr : 10.3.0.1
HP-IB#
Defaults: This command has no defaults.
Related Commands: “interface mgmt-ethernet” (page 202)
show interface mgmt-ib
Synopsis: The show interface mgmt-ib command displays the status and address
information for the virtual Management-InfiniBand port.
Syntax: show interface mgmt-ib
This command takes no card or port designation.
Command Modes: User-execute and privileged-execute modes.
Privilege Level: General read-only user.
Usage Guidelines: Refer to the “Install HP Fabric Clustering System Switches” (page 41) for
information regarding Interface Management IB port.
Examples:
HP-IB# show interface mgmt-ib
===============================================================
Show Commands 167