HP Fabric Clustering System HP-UX Administrator's Guide, March 2008

lid : 14
master-sm-lid : 0
capability-mask : 00:00:00:00
diag-code : 00:00
mkey-lease-period : 00:00
local-port-num : 255
link-width-enabled : 1x, 4x
link-width-supported : 1x, 4x
link-width-active : 4x
link-speed-supported : 2.5 Gbps
state : active
port-phys : linkup
link-down-def : polling
mkey-protect-bits : 0
lmc : 0
ls-active : 2.5 Gbps
ls-active-enabled : 2.5 Gbps
neighbor-mtu : 2048
master-sm-sl : 0
vl-cap : VL0 - VL7
vl-high-limit : 0
vl-arbitration-high-cap : 8
vl-arbitration-low-cap : 8
mtu-cap : 2048
vl-stall-count : 0
hoq-life : 7
op-vls : VL0 - VL7
pkey-enf-in : 0
pkey-enf-out : 0
filter-raw-pkt-in : 0
filter-raw-pkt-out : 0
mkey-violations : 0
pkey-violations : 0
...output truncated
HP-IB#
Defaults: This command has no defaults.
Related Commands: “show interface ib” (page 163)
“show interface ib sm” (page 165)
show interface ib sm statistics
Synopsis: The show interface ib sm statistics command displays the InfiniBand
interface statistics.
Syntax: show interface ib sm statistics
Command Modes: User-execute and privileged-execute modes.
Privilege Level: InfiniBand read-only user.
Usage Guidelines: None.
Examples: The following example displays the SMA node information for InfiniBand port 1.
HP-IB> show interface ib 1/1 statistics
================================================================================
InfiniBand Interface Statistics
================================================================================
port : 1/1
name : 1/1 (65)
in-octets : 11388
in-ucast-pkts : 39
in-multicast-pkts : 0
in-broadcast-pkts : 0
in-discards : 0
in-errors : 0
in-unknown-protos : 0
out-octets : 11388
166 Switch Command Line Interface