HP Fabric Clustering System HP-UX Administrator's Guide, March 2008

sl8toVl : 0
sl9toVl : 0
sl10toVl : 0
sl11toVl : 0
sl12toVl : 0
sl13toVl : 0
sl14toVl : 0
sl15toVl : 0
…
Defaults: This command has no defaults.
Related Commands: “ib sm subnet-prefix” (page 182)
“show ib sm configuration” (page 141)
“show ib-agent switch” (page 156)
show ib-agent switch switch-info
Synopsis: The show ib-agent switch switch-info keyword shows the service level
(SL) to virtual lane (VL) mapping table for the nodes on switch devices.
Syntax: show ib-agent switch [card/port | all] switch-info
Command Modes: User-execute and privileged-execute modes.
Privilege Level: InfiniBand read-only user.
Usage Guidelines:
Table B-29 show ib-agent switch all Output Descriptions
DescriptionOutput
64-bit GUID of this node.node-guid
Ingress port number. The value is an integer between 0 and 255.in-ib-port
Egress port number. The value is an integer between 0 and 255.out-ib-port
SL0 to VL mapping.
Examples:
HP-IB# show ib-agent switch all switch-info
============================================================================
SMA Switch Information
============================================================================
guid : 00:05:ad:00:00:00:02:40
lft-cap : 49152
rft-cap : 0
mft-cap : 1024
lft-top : 1024
default-port : 255
def-mcast-pri-port : 255
def-mcast-NP-port : 255
life-time-value : 11
port-state-change : 0
lids-per-port : 0
partition-enf-cap : 64
inbound-enf-cap : 1
outbound-enf-cap : 1
filter-raw-pkt-in-cap : 1
filter-raw-pkt-out-cap : 1
guid : 00:05:ad:00:00:00:02:42
lft-cap : 49152
rft-cap : 0
mft-cap : 1024
lft-top : 1024
default-port : 255
162 Switch Command Line Interface