HP Fabric Clustering System HP-UX Administrator's Guide, March 2008

VL-cap : VL0 - VL7
VL-high-limit : 0
VL-arbitration-high-cap : 8
VL-arbitration-low-cap : 8
MTU-cap : 1024
VL-stall-count : 0
HOQ-life : 7
op-VLs : VL0 - VL7
pkey-enf-in : 0
pkey-enf-out : 0
filter-raw-pkt-in : 0
filter-raw-pkt-out : 0
mkey-violations : 0
pkey-violations : 0
qkey-violations : 0
guid-cap : 1
subnet-timeout : 31
resp-time-value : 8
local-phys-err : 4
overrun-err : 0
Defaults: This command has no defaults.
Related Commands: “ib sm subnet-prefix” (page 182)
“show ib sm configuration” (page 141)
“show ib-agent switch” (page 156)
show ib-agent switch sl-vl-map
Synopsis: The show ib-agent switch sl-vl-map keyword shows the service level (SL)
to virtual lane (VL) mapping table for the nodes on switch devices.
Syntax: show ib-agent switch [card/port | all] sl-vl-map
Command Modes: User-execute and privileged-execute modes.
Privilege Level: InfiniBand read-only user.
Usage Guidelines:
Table B-28 show sm ib-agent switch Output Descriptions
DescriptionOutput
64-bit GUID of this node.node-guid
Ingress port number. The value is an integer between 0 and 255.in-ib-port
Egress port number. The value is an integer between 0 and 255.out-ib-port
SL0 to VL mapping.
Examples:
HP-IB# show ib-agent switch 00:05:ad:00:00:00:13:7f sl-vl-map
======================================================================
SLVL-Map Table
======================================================================
node-guid : 00:05:ad:00:00:00:13:7f
in-ib-port : 0
out-ib-port : 0
sl0toVl : 0
sl1toVl : 0
sl2toVl : 0
sl3toVl : 0
sl4toVl : 0
sl5toVl : 0
sl6toVl : 0
sl7toVl : 0
Show Commands 161