HP Fabric Clustering System HP-UX Administrator's Guide, March 2008

show ib-agent switch all pkey-info
Synopsis: The show ib-agent switch all pkey-info command displays the index of
the partition key table.
Syntax: show ib-agent all pkey-info|
Command Modes: User-execute and privileged-execute modes.
Privilege Level: InfiniBand read-only user.
Usage Guidelines: A 16-bit partition key value is carried in packets and stored in the Channel
Adapters. The value is used to determine membership in a partition. This keyword also identifies
the node GUID and InfiniBand port of that node.
Examples
HP-IB# show ib-agent switch all pkey-info
======================================================================
PKey Information
======================================================================
HP-IB#
Defaults: This command has no defaults.
Related Commands: “ib sm subnet-prefix” (page 182)
“show ib sm configuration” (page 141)
“show ib-agent switch” (page 156)
show ib-agent switch port-info
Synopsis: The show ib-agent switch port-info command lists all the port attributes
of InfiniBand switches, such as their capabilities, MTUs, states, speeds, link widths, and limits.
Syntax: show ib-agent switch [card/port | all] port-info
Command Modes: User-execute and privileged-execute modes.
Privilege Level: InfiniBand read-only user.
Usage Guidelines None.
Examples:
HP-IB# show ib-agent switch 00:05:ad:00:00:00:13:7f port-info
======================================================================
Port Information
======================================================================
node-guid : 00:05:ad:00:00:00:13:7f
port : 0
mkey : 00:00:00:00:00:00:00:00
gid-prefix : 00:00:00:00:00:00:00:00
lid : 2
master-SML-id : 1
capability-mask : 00:00:02:08
diag-code : 00:00
mkey-lease-period : 00:00
local-port-num : 255
link-width-enabled : 1x, 4x
link-width-supported : 1x, 4x
link-width-active : 1x
link-speed-supported : 2.5 Gbps
state : active
port-phys : nop
link-down-def : polling
mkey-protect-bits : 0
LMC : 0
ls-active : 2.5 Gbps
ls-active-enabled : 2.5 Gbps
neighbor-MTU : 256
master-SMSL : 0
160 Switch Command Line Interface