HP Fabric Clustering System HP-UX Administrator's Guide, March 2008

Table B-13 show ib sm neighbor Command Field Descriptions
DescriptionField
64-bit value that identifies the InfiniBand subnet to which this node belongs.subnet-prefix
64-bit GUID of the InfiniBand node.local-node-guid
Port ID of the InfiniBand node. The value is an integer between 0 and 255.local-port-id
Type of the InfiniBand node. The value is channel-adapter, switch, or router.local-node-type
64-bit Guid of the neighboring InfiniBand node to which the local node is linked.remote-node-guid
Port ID of the neighboring InfiniBand node to which the local node is linked. The value is an
integer between 0 and 255.
remote-port-id
Type of the neighboring InfiniBand node. The value is channel-adapter, switch, or router.remote-node-type
State of the link between the local and neighboring nodes. The value is noStateChange, down,
initialize, armed, or active.
link-stat
Active link width. This parameter is used with LinkSpeedActive to determine the link rate
between the two connected nodes. The value is width1x, width4x, or width12x.
link-width-active
Examples:
HP-IB# show ib sm neighbor
============================================================================
Subnet Management Neighbor
s============================================================================
subnet-prefix : fe:80:00:00:00:00:00:00
local-node-guid : 00:05:ad:00:00:00:11:97
local-port-id : 2
local-node-type : channel-adapter
remote-node-guid : 00:05:ad:00:00:00:13:da
remote-port-id : 1
remote-node-type : switch
link-state : active
link-width-active : width4x
subnet-prefix : fe:80:00:00:00:00:00:00
local-node-guid : 00:05:ad:00:00:00:13:da
local-port-id : 1
local-node-type : switch
remote-node-guid : 00:05:ad:00:00:00:11:97
remote-port-id : 2
remote-node-type : channel-adapter
link-state : active
link-width-active : width4x…
<output truncated>
Defaults: This command has no defaults.
Related Commands: “ib sm subnet-prefix” (page 182)
show ib sm node subnet-prefix
Synopsis: The show ib sm node subnet-prefixcommand displays the configuration
and attributes of subnet management nodes in a specified subnet or the whole InfiniBand fabric.
Syntax: show ib sm node subnet-prefix subnet prefix [ all | node guid | summary]
The arguments associated with this command are described below:
Table B-14 show ib sm node subnet-prefix Command Syntax Descriptions
DescriptionSyntax
Enter the subnet prefix of the subnet manager that you want to display.
subnet-prefix
subnet prefix
Displays all subnet information in the InfiniBand fabric.
all
144 Switch Command Line Interface