HP Fabric Clustering System HP-UX Administrator's Guide, March 2008

Related Commands: “show power-supply” (page 171)
“show sensor” (page 172)
show host
Synopsis: The show host command displays the Domain Name System configuration of the
chassis.
Syntax: show host
Command Modes: User-execute and privileged-execute modes.
Privilege Level: Fibre Channel read-only user.
Usage Guidelines: The information displayed is the network domain of the chassis, and the
DNS servers that are used to resolve network names to IP addresses.
Examples:
HP-IB# show host
============================================================================
Host Information
============================================================================
name-server-one : 10.3.106.20
name-server-two : 0.0.0.0
domain-name : shastaHP-IB#
Defaults: This command has no defaults.
Related Commands: “hostname” (page 200)
show ib
The show ib command displays information about the subnet manager running on the InfiniBand
fabric. The information displayed is used to configure the subnet manager, including the nodes
and ports within that subnet.
Synopsis: The show ib sm configuration command displays information about the
subnet managers running on the InfiniBand fabric.
Syntax: show ib sm configuration
This command requires several keywords, which are shown in the table below.
Table B-9 show ib Keyword Descriptions
DescriptionKeyword
Displays the configuration of the subnet manager that is running on the InfiniBand fabric. It includes
information like the subnet manager GUID, SM Key, and status. See “show ib sm configuration”
on page 170.
configuration
Displays the inter-connectivity of nodes on the subnet and their GUIDs. It identifies the GUID of
each node, the node ports, and the ports to which they are linked. It includes information like node
type and status. See “show ib sm neighbor” on page 172.
neighbor
Displays the configuration and attributes of nodes on the subnet. In addition to node and port
GUIDs, this command keyword identifies the node device and vendor. See “show ib sm node” on
page 174.
node
Displays the configuration and attributes of ports on the subnet. It includes information like link
and virtual lane attributes, as well as packet violations. See “show ib sm port” on page 177.
port
Displays the configuration and capabilities of switches on the subnet. This includes information
like the type of forwarding supported and switch capabilities. See “show ib sm switch” on page
184.
switch
show ib sm configuration
Synopsis: The show ib sm configuration command displays information about the
subnet managers running on the InfiniBand fabric.
Show Commands 141