HP Fabric Clustering System HP-UX Administrator's Guide, March 2008

HP-IB# show card-inventory
================================================================================
Card Resource/Inventory Information
================================================================================
slot-id : 1
used-memory : 52652 (kbytes)
free-memory : 75172 (kbytes)
used-disk-space : 66930 (kbytes)
free-disk-space : 35449 (kbytes)
last-image-source : Release-1.1.3hp/build020
primary-image-source : Release-1.1.3hp/build020
image : Release-1.1.3hp/build020
cpu-descr : PPC 440GP Rev. C - Rev 4.129 (pvr 4012 0481)
fpga-firmware-rev : 6
ib-firmware-rev : 5.1.0
HP-IB#
Defaults: “show card inventory” defaults to” show card inventory all”
Related Commands: “boot-config” (page 190)
“card” (page 192)
“copy” (page 193)
show clock
Synopsis: The show clock command displays the current system time.
Syntax: show clock
Command Modes: User-execute and privileged-execute modes.
Privilege Level: Unrestricted read-write user.
Usage Guidelines: If the clock is not set, system time begins at 00:00:00, January 1, 1970.
Examples:
HP-IB# show clockMon Mar 17 02:26:32 2003 (UTC)HP-IB#
Defaults: This command has no defaults.
Related Commands: “clock” (page 192)
show config
Synopsis: The show config command displays the current configuration as a series of
commands executed during the current CLI session. When executed, this command queries all
active service components to collect their current configuration data and translates the data into
a CLI command format for display.
Syntax: show config
Command Modes: User-execute and privileged-execute modes.
Privilege Level: Unrestricted read-write user.
Usage Guidelines: This is a record of the configuration steps performed and may be saved,
edited, and reused to replicate a configuration.
HP-IB# show config
! Release-1.1.3hp/build020
! Thu Jan 8 13:10:50 2004
enable
config terminal
!
boot-config primary-image-source Release-1.1.3hp/build020
!
ib sm subnet-prefix fe:80:00:00:00:00:00:00 sweep-interval 600
!
interface mgmt-ethernet
ip address 15.13.118.181 255.255.248.0
Show Commands 139