HP Fabric Clustering System HP-UX Administrator's Guide, March 2008

show card-inventory
Synopsis: The show card-inventory command polls individual system interface cards for
their system resources and the image data residing on the interface card.
Syntax: show card-inventory {card# | card#-card# | card#,card#,card#... | all}
This command has the following arguments:
show card-inventory Syntax Description
Table B-6 show card-inventory Command Syntax Descriptions
DescriptionSyntax
Refers to an individual slot number.card#
Refers to a range of slot numbers. Displayed in the form card#-card#card#-card#
Refers to a list of slot numbers in the form card#,card#,…Do not add spaces between elements
in the list.
card#,card#,card#...
Displays all cards. The CLI defaults to “add” if you only enter the show card command.all
Command Modes: User-execute and privileged-execute modes.
Privilege Level: General read-only user.
Usage Guidelines: Each system interface card is a system in itself. System resources comprise:
• available and used memory
• available and used flash memory space
• system-image on the interface card
• CPU name and version
The system-image should match the image that is on the controller card. Occasions may occur
when you update the system-image on the controller but it is not propagated to an interface card,
such as when swapping interface cards between chassis or updating the system-image on the
controller when an interface card is down.
Disk space may be an issue if you try to update the system-image on the controller but cannot
propagate this data to the interface card because the interface card is full.
The CPU description may be requested by support-personnel in the event you are experience
difficulties with a controller or interface card.
The fields in the show card-inventory output are described in the table below.
Table B-7 show card-inventory Command Field Descriptions
DescriptionField
Slot number of the controller card.slot-id
Total amount of local RAM being used by the card.used-memory
Total amount of available local RAM.free-memory
Total amount of local flash memory space being used by the card.used-disk-space
Total amount of available local flash memory space.free-disk-space
Indicates the system-image to use the next time the system is rebooted or power-cycled.
This value should be the same for all cards in the system.
primary-image-source
If there is only instance of the image field, it indicates the system-image used to initialize
the card firmware. If there are two instances of the image field, the second instance indicates
a second system-image present on the card.
image
CPU type, model, and firmware version.cpu-descr
Examples: To display the configuration and status information for controller:
138 Switch Command Line Interface