HP Fabric Clustering System HP-UX Administrator's Guide, March 2008

Table B-1 Show Commands (continued)
DescriptionCommand
Display the system location. See “show location” (page 169).location
show
Displays the active system log file. See “show logging>” (page 169).logging
show
Displays the Network Time Protocol (NTP) servers used to maintain and synchronize
the system clock. See “show ntp” (page 170).
ntp
show
Show power-supply status. See “show power-supply” (page 171).power-supply
show
Show the running status of the system. See “show running-status” (page 171).running-status
show
Show system chassis temperature sensor status. See “show sensor” (page 172).sensor
show
Show SNMP linkUp/linkDown trap receivers. See “show snmp” (page 173).snmp
show
Show all services. See “show system-services” (page 173)system-services
show
Show CLI display and login settings. See “show terminal” (page 174).terminal
show
Show trace settings to debug system application modules. See “show trace” (page 174)trace
show
Show current users, permission levels, and login statistics. See “show user” (page 175).user
show
Show system software version currently in use. See “show version” (page 176).version
show
show arp ethernet
Synopsis: The show arp ethernet command displays the entries in the Ethernet routing
tables.
Syntax: show arp ethernet
Command Modes: User-execute and privileged-execute modes.
Privilege Level: Ethernet read-only user.
Usage Guidelines: ARP connections are dynamically created on an as-needed basis and ARP
entries are removed from ARP routing tables when connections are dropped.
Examples: To display the Ethernet ARP table:
HP-IB# show arp ethernet
===============================================================
ARP Information
===============================================================
port physical-address net-address type
----------------------------------------------------------------------------
4/1 00:05:ad:00:10:41 20.45.0.1 static
Defaults: There are no defaults for this command.
Related Commands: “show arp ethernet” (page 133)
“arp ib” (page 177)
“show arp IB” (page 133)
show arp IB
Synopsis: The show arp ib command displays the entries in the InfiniBand ARP routing
tables.
Syntax: show arp ib
Command Modes: User-execute and privileged-execute modes.
Privilege Level: InfiniBand read-only user.
Usage Guidelines: ARP connections are dynamically created on an as-needed basis and ARP
entries are removed from ARP routing tables when connections are dropped.
Show Commands 133