HP Fabric Clustering System HP-UX Administrator's Guide, March 2008

Examples
The examples section shows actual command entry and the results of executing it.
For example:
HP-IB# show interface gateway 5
=============================Gateway Information============================
gateway : 5
name : 5/0
type : fc-gateway
desc : 5/0 (320)
last-change : none
mtu : 0
admin-status : up
oper-status : up
HP-IB#
Defaults
The Defaults subsection lists command defaults.
Related Commands
Provides hypertext links to other related commands.
Show Commands
The show commands are used to display user, configuration, network, and status information
for the system. All users, such as super and guest, can apply these commands to view the system
configuration, with a few exceptions. These exceptions are noted in the respective command
descriptions.
Table B-1 Show Commands
DescriptionCommand
Show InfiniBand ARP route tables. See “show arp ethernet” (page 133)arp
show
Displays the method of authentication. See “show authentication” (page 134)authentication
Show the SEEPROM (Serial Electrically Erasable and Programmable Read Only Memory)
information for the system backplane. See “show backplane” (page 134)
backplane
Show image and configuration data used to bring-up the chassis. See “show boot-config”
(page 135)
boot-config
Show card attributes such as type, slot, and status. See “show card” (page 136)card
Poll individual system interface cards for their system resources and resident image
data. See “show card-inventory” (page 138)
card-inventory
Show the current system time. See “show clock” (page 139)clock
Show the system:running_config(uration). See “show config” (page 139)config
Show status of the fans maintaining system chassis temperature. See “show fan” (page 140)fan
Show DNS information for the chassis. See “show host” (page 141)host
show
Show the nodes, ports, and links being managed by the InfiniBand subnet manager. See
“show ib sm configuration” (page 141)
ib sm
show
Show subnet management agent settings for the channel adapters and switches on the
system fabric. See “show ib-agent channel-adapter” (page 154).
ib-agent
Show status and configuration of InfiniBand ports. See “show interface ib” (page 163)interface ib
show
Show IP address and route tables. See “show ip” (page 168).ip
show
132 Switch Command Line Interface