HP Fabric Clustering System HP-UX Administrator's Guide, March 2008

NOTE: Do not remove the power cord to reboot the system.
Reboot the System Through the CLI
• Enter the CLI reload command in privilege EXEC mode. For example
HP-IB> enable
HP-IB# reload
System configuration has been modified. Save?
[yes(default)/no/*.cfg] yes
Proceed with reload? [confirm]
HP-IB#
Connection to host lost.
NOTE: If you have dual-controllers in your chassis, you can use the reload no-failover
option. This forces both Controllers to be rebooted simultaneously, and does not allow a failover
to the Standby Controller.
Switch Administration and Management 107