HP 9000 Networking XTI Programmer's Guide

XTI over OSI Networks

Addressing

using the t_connect(3) call. Use the complete t-address for the destination

address in t_connect where t_sel_len is the length of the t-selector, and

nsel_len is the length of the NSAP. Note that the address is padded with a

zero.

If the remote system is also running OTS/9000, you can ﬁnd the conﬁgured

NSAP in the OSIADMIN screen for the corresponding network under

“Subnetwork Conﬁguration.”