FTAM/9000 Programmer's Guide

Chapter 2 45
Using HP FTAM/9000
Starting and Stopping the FTAM System
Starting and Stopping the FTAM System
The HP OSI Transport Services (OTS/9000) startup procedure
automatically starts the ftam_resp daemon (HP FTAM responder). You
may occasionally need to start or stop only the FTAM portion of the
system.
NOTE Bringing down the FTAM portion of the HP OSI network system is
destructive and abruptly terminates any activity using the VFS
associated with the local responder.
Using the shutdown option of ftam_resp does not kill user programs or
ftam_init processes, though they will encounter unexpected errors when
you bring down the system. You must be superuser to shutdown the
FTAM responder, as follows.
$ /opt/ftam/lbin/ftam_resp -shutdown
To re-start only the FTAM portion of the HP OSI network system, first
ensure the system is running. Also, execute the ps(1) command to ensure
that no FTAM responder daemons (ftam_resp) are running; if they are,
execute the above shutdown command. You must be superuser to re-start
ftam_resp, as follows.
$ /opt/ftam/lbin/ftam_resp