Ethernet System-Driver Matrix for HP-UX 11i v1, 11i v2, and 11i v3

H
November 16, 2009
HP-UX
11i v1
HP-UX
11i v2
HP-UX
11i v3
BL860c 3 Yes
Requires BL860c Rev. B server.
BL870c 3 Yes
rx2660 2 Yes Yes
rx3600 2 Yes Yes
rx6600 2 Yes Yes
rx7640 8 Yes Yes
rx8640 8 Yes Yes
rx8640 - IOX 16 Yes Yes
HP Integrity
Superdome sx2000
16 way
32 way
64 way
24 bootable
48 bootable
96 bootable
Yes Yes
rx1600 1 bootable Yes Yes
rx1620 1 bootable Yes Yes
rx2600 1 bootable Yes Yes
rx2620 1 bootable Yes Yes
See rx1620 notes.
On the rx2620 with four I/O slots, a maximum quantity for any I/O config using 337972-B21,
AB287A, or A9890A cards: (2) 337972-B21 plus two unpopulated slots, or one AB287A plus
three unpopulated slots, or three A9890A plus (1) unpopulated slot.
10-Gigabit Ethernet Mezzanine Cards
NC532m 2 port 10 GbE BL-c
x8 PCIe mezzanine blade card
467799-B21 (Itanium)
10GigEthr-02
(iexgbe)
Notes
Compatible Operating
Systems
2
AB287A PCI-X 133 MHz 10 GbE
SR Fiber (Itanium)
6
10GigEthr-00
(ixgbe)
Max Cards Per
Server
1
HP-UX Ethernet Card Support Matrix
(formerly Ethernet System-Driver Matrix for HP-UX 11i v1, 11i v2, and 11i v3)
Adapter
Description
Software Bundle
Name
3
Compatible Server
Use this matrix to determine the supported server platforms and software requirements for HP
network adapters. The drivers for the products shown in this matrix are distributed on HP-UX server
release media and are installed along with an Operating Environment. However, some of the
products and drivers listed may be newer than your server's Operating Environment.
10GigEthr-01
(icxgbe)
AD386A PCIe 10GbE SR Fiber
(Itanium)
The AB287A 10 GigE card, and two HP Smart Array RAID cards (the 337972-B21 and
A9890A) support the following maximum use in the rx1620 and rx2620 servers.
Stated maximums cannot be combined. If a system with six I/O slots states a maximum of two
AB287A cards, the other four slots must be left unpopulated.
When installing two AB287A cards you cannot install any other cards.
On rx1620 with two I/O slots, the max quantity for any I/O config using Smart Array RAID
Controller 337972-B21, 10 Gigabit Ethernet AB287A, or RAID A9890A cards: one 337972-
B21, or one AB287A, or one A9890A plus one other I/O card with 15W [total] max.
10-Gigabit Ethernet PCIe Cards
10-Gigabit Ethernet PCI-X Cards
rx2660 3 bootable Yes Yes
The rx2660 with all PCI-X slots supports three AB287A cards.
The rx2660 with combined PCIe slots supports one AB287A card.
rx3600 4 bootable Yes Yes
The rx3600 with all PCI-X slots supports four AB287A cards.
The rx3600 with all PCIe slots supports four AB287A cards.
rx6600 4 bootable Yes Yes
The rx6600 with all PCI-X slots supports four AB287A cards.
The rx6600 with all PCIe slots supports two AB287A cards.
rx7620 2 bootable Yes Yes
rx7640 4 bootable Yes Yes
rx8620 2 bootable Yes Yes
rx8620 - IOX 2 bootable Yes Yes
rx8640 4 bootable Yes Yes
rx8640 - IOX 4 bootable Yes Yes
Integrity Superdome
sx1000
16 way
32 way
64 way
128 way
2 bootable in
each I/O chassis
Yes Yes
Integrity Superdome
sx2000
4 bootable in
each I/O chassis
Yes Yes
HP-UX Ethernet Card Support Matrix Page 1 of 16

Summary of content (16 pages)