AB287A PCI-X 10 Gigabit Ethernet Card Overview

Physical, Environmental, and Regulatory Information
Laser Safety Statements
Appendix A
15
Laser Safety Statements
Laser Safety Statements - U.S. FDA/CDRH - Optical (laser) Transceiver
CAUTION The optical transceiver provided on the network interface card contains a laser system and is classified as a
“Class-I Laser Product” under a U.S. Department of Health and Human Services (DHHS) Radiation
Performance standard according to the Radiation Control for Health and Safety Act of 1968. The Class I label
and compliance statement are located on the optical transceiver.
To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the
unit ever require maintenance, contact an authorized service location.
CAUTION Use of controls, adjustments or the performance procedures other than those specified herein may result in
hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure.
Laser Safety - European Union - Optical Transceiver Only
CAUTION The optical transceiver provided on the network interface card contains a laser system and is classified as a
“Class 1 Laser Product” per EN 60825-1, Safety of Laser products. Class 1 laser products are considered safe
and do not pose a biological hazard if used within the data sheet limits and instructions.
To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the
unit ever require maintenance, contact an authorized service location.
CAUTION Use of controls, adjustments or the performance procedures other than those specified herein may result in
hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure.
There are no user serviceable parts nor any maintenance required for the optical transceiver. All adjustments are made at the
factory before shipment to customers. Tampering with or any attempt to modify the optical transceiver will result in voided
product warranty. It may also result in improper operation of the network card circuitry and possible overstress of the laser
source. Device degradation or product failure may result.