A7011A/A7012A PCI-X 2 Port Gigabit Ethernet / Card Overview HP-UX Networking HP 9000 and HP Integrity Systems E0307 U.S.A. © Copyright 2007 Hewlett-Packard Development Company L.P.
Legal Notices The information in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Features Features Features The A7011A/A7012A PCI-X Combination cards have the following features: • PCI-X 133 MHz capable card. It can operate at 32-bit or 64-bit compatible modes and is supported in the following frequencies: PCI 33/66, PCI-X 66/100/133. • Supports HP-UX 11i v3 (64 bit), v2 (64 bit) or 11i v1 on HP 9000 (PA-RISC-based) and HP-UX 11i v3 (64 bit) or v2 (64 bit) only on HP Integrity (Itanium or Itanium2-based) platforms.
Features Driver Availability Driver Availability The Dual Port Gigabit Ethernet cards use the iether driver. The bundle name for this driver is IEther-00. * for HP-UX 11i v1 (11.11): December 2003 media * for HP-UX 11i v2 (11.23): March 2004 media or http://www.hp.com/ To locate the iether driver on the web, go to http://www.hp.com/ and enter A7011A or A7012A in the 'Search' field. On the search results page, scroll down to find the HP-UX 11.23 Dual Port Gigabit Ethernet Driver (iether).
Features Interoperability Interoperability The A7012A card does not interoperate with older switches containing a BCM 5400 PHY with a version earlier than C-5. The problem occurs when interfacing with switches such as the HP Procurve Module J4115A; version J4115B fixes the Procurve problem. Recording Card Information Record the serial number and MAC address located on the card for future reference. The MAC address labelled on the card refers to LAN port A.
Features Figure 1 A7011A PCI-X Fiber-based 2-Port Gigabit Ethernet Card Activity/Link LED for Port B Flashing = Data traffic; Solid = Active link PCI-X Dual-Port 1000Base-SX Port B } Duplex LC connectors Port A Activity/Link LED for Port A Flashing = Data traffic; Solid = Active link 6
Features Figure 2 A7012A PCI-X Copper-based 2-Port Gigabit Ethernet Card PCI-X Dual-Port 1000Base-T Port B Activity/Link LEDs Flashing = Data traffic Solid = Active link } RJ-45 Connectors Port A Speed LEDs Off = 10 Mbit/s Green = 100 Mbit/s Yellow = 1000 Mbit/s 7
Features Cable Specifications Cable Specifications Operating Distance for 1000Base-T (Copper UTP): Up to 100 meters — Cat 5 and Cat 5E Operating distances for 1000Base-SX using multi-mode fiber optic cable are as follows: Description (850nm short wavelength laser) Modal Bandwidth Operating Distance 62.5 micron MMF 160 (MHz * km) 2 to 220 meters (6.6 to 722 ft) 200 (MHz * km) 2 to 275 meters (6.6 to 902 ft) 50 micron MMF 400 (MHz * km) 2 to 500 meters (6.
Physical, Environmental and Regulatory Information Card Physical and Environmental Specifications A Physical, Environmental and Regulatory Information This appendix contains regulatory statements for the United States, Canada, Australia/New Zealand, Japan, and the European community. Card Physical and Environmental Specifications Following are the product physical and environmental specifications of the A7011A/A7012A PCI-X 2-Port Gigabit Ethernet Card.
Physical, Environmental and Regulatory Information FCC Statement (For U.S.A.) Maximum kV (if less than 15 kV) with no loss of function 8 Maximum kV (if less than 25 kV) with no component damage 25 Operating Altitude 3,000 meters (9900) ft Non-operating Altitude 4,500 meters (14850 ft) Electromagnetic Compatibility This document contains regulatory statements for the United States and the European community. FCC Statement (For U.S.A.
Physical, Environmental and Regulatory Information Canada Canada Warning: This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe A respecte toutes les exigences du règlement sur le matériel brouilleur du Canada. EMI Statement (European Community) NOTE This is a Class A product. In a domestic environment, this product may cause radio interference, in which case you may be required to take adequate measures.
Physical, Environmental and Regulatory Information VCCI (Japan) (PCI Card Only) VCCI (Japan) (PCI Card Only) This equipment complies with the Class A category for information technology equipment based on the rules of Voluntary Control Council for Interference by Information Technology Equipment. When used in a residential area, radio interference may be caused. In this case, the user may be required to take appropriate corrective actions.
Physical, Environmental and Regulatory Information Laser Safety Statements Laser Safety Statements Laser Safety Statements - U.S. FDA/CDRH - Optical (laser) Transceiver CAUTION The optical transceiver provided on the network interface card contains a laser system and is classified as a “Class-I Laser Product” under a U.S. Department of Health and Human Services (DHHS) Radiation Performance standard according to the Radiation Control for Health and Safety Act of 1968.
Physical, Environmental and Regulatory Information Laser Safety Statements A7011A & A7012A Declaration of Conformance 14
