HP-UX vPars and Integrity VM V6.1.5 Administrator Guide (5900-2295, April 2013)

Example 4 Deleting an NPIV resource
vparmodify -P vPar1 -d hba:avio_stor:,,0x50060b00006499b9,
0x50060b00006499ba:npiv:/dev/fcd1
For the relevant vPar, you can use this syntax by copying it from the I/O details of the vparstatus
command output and pasting it where required.
For more information about NPIV, see the white paper, HP-UX vPars 6.0 & 6.1 and Integrity VM
4.3 & 6.1 N_Port ID Virtualization (NPIV), on the BSC website.
5.4 Migrating VM guests with NPIV HBAs
V6.1.5 supports online migration of VM guests and offline migration of vPars and VMs with NPIV
HBAs across an FC fabric. With V6.1, such a migration required that the source and the target
hosts be connected to the same physical switch. With the V6.1.5 release, this restriction has been
removed. After the migration, the NPIV HBAs of a particular guest might not always be spread
across different pFCs ports or adapters on the target host. For information about how physical HBA
ports are chosen on the target host during migration, see “Rules for selecting physical HBA ports
during migration with NPIV HBAs” (page 217).
60 Using NPIV with vPars and Integrity VM