HP-UX vPars and Integrity VM V6.1.5 Administrator Guide (5900-2295, April 2013)

Once you have read the product release notes and verified that you have met the system
requirements, install the Integrity VM software as described in this section.
NOTE: Installing the vPars and Integrity VM software requires the system to reboot. Therefore,
the swinstall command line installation includes the -x autoreboot=true parameter. If you
have installed Integrity VM V4.3 with September Web Release (WEB1211) AVIO bundles, you
must use the -x allow_downdate=true parameter.
To update the VSP and VM guests from V4.3 to V6.1.5, follow these steps:
1. Migrate VM guests to an alternate VSP or perform and orderly shut down of all Integrity VM
guests on the V4.3 VSP.
If you have a VSP established as an OVMM target host, HP recommends that you migrate the
VM guests to that VSP. If no OVMM target VSP exists, perform an orderly shut down of the
VM guests. For example, perform one of the following steps:
• Migrate existing VM guests to an alternate VSP (V4.3, V6.1, or V6.1.5):
VSP -> hpvmmigrate -P VM name -o -h Target VSP
• Perform an orderly shut down of all Integrity VM guests on the V4.3 VSP:
VM -> shutdown -h -y 0
SHUTDOWN PROGRAM
05/30/12 09:21:43 PDT
Broadcast Message from root (ttyp1) Wed May 30 09:21:43...
SYSTEM BEING BROUGHT DOWN NOW!!!
...
2. Mount DVD HP-UX 11i v3 September 2012 ISO Image or locate the September 2012 Depot
Server.
VSP -> kcmodule fspd=unused
VSP -> kcmodule fspd=loaded
VSP -> mount /tmp/HP-UX_11i_v3_DC-OE_Core_1_2actualDVDname.iso /dvdrom
VSP -> bdf
Filesystem kbytes used avail %used Mounted on
/dev/vg00/lvol3 2097152 231152 1851488 11% /
/dev/vg00/lvol1 2097152 371040 1712696 18% /stand
/dev/vg00/lvol8 10485760 1449064 8973992 14% /var
/dev/vg00/lvol7 10485760 3075176 7352720 29% /usr
/dev/vg00/lvol6 20971520 11325968 9570272 54% /tmp
/dev/vg00/lvol5 10485760 5039496 5403832 48% /opt
/dev/vg00/lvol4 10485760 21152 10382856 0% /home
/dev/fspd1 75359147535914 0 100%/dvdrom
3. Run update-ux on the V4.3 VSP:
VSP -> update-ux -s /dvdrom
======= Mon May 28 21:31:01 PDT 2012 BEGIN update-ux
NOTE: Output is logged to '/var/adm/sw/update-ux.log'
* Obtaining some information from the source depot.
* Copying an SD agent from the source depot
* Installing the Update-UX product
Current update-ux version: 11.31.22
Source depot update-ux version: 11.31.22
* Installing the SW-GETTOOLS product
* Configuring the SW-GETTOOLS product
* Installing the SD filesets to be used for the update
* Installing the SWM filesets needed to perform OE update
NOTE: Running swm
52 Upgrading the VSP from previous versions of Integrity VM