Instant Capacity on Demand (iCOD) User's Guide for versions B.05.x

iCOD Manpages
iCOD (5) Manpage
Appendix D144
iCOD (5) Manpage
iCOD (5)
NAME
iCOD – instant Capacity on Demand software for HP-UX
DESCRIPTION
iCOD provides services for instantly increasing processing capacity on
supported HP servers to respond to increasing system demands. When
the processing demand significantly changes, the user executes the
icod_modify (see icod_modify (1M)) command to instantly activate or
deactivate processors, or defer an activation or deactivation until the
next reboot.
Initializing an iCOD Server
iCOD is typically installed by HP manufacturing on instantly ignited
systems or can be installed by an HP support representative on existing
supported servers as an add-on. After iCOD has been installed on a
system, a system contact must be specified and a free license applied.
Complete the configuration as follows:
1) Use the icod_modify -c command (see icod_modify
(1M)) to configure contact information (name, phone,
e-mail address). This information is used by HP to send
licensing instructions to the system contact.
2) Use the icod_stat (see icod_stat (1M)) command to
check the current status of the iCOD processors and
verify that the contact information is set properly.