HP Instant Capacity Version 10.x Release Notes (5900-1580, March 2011)

• If you have a virtual partitioned environment, the Virtual Partitions (vPars) software (bundle

T1335AC) must be version A.03.05 or higher. vPars is available separately and is not included

with the OE.

• (GiCAP only) The CIM Server configuration property sslClientVerificationMode must be set to

a value of “optional” on all GiCAP Group Managers and on all OS instances of all member

systems. (The CIM Server may need to be restarted if the property was not previously set to

this value.) For details on setting sslClientVerificationMode, see “Upgrading Version 8.x Groups

to Version 9.x or Later” (page 27). Note that communication between the managers and

members of groups is established using SSL certificates that are supplied by the GiCAP software.

Required Patches for HP-UX 11i v1

The following patches are required for Instant Capacity version 9.x (or later) on HP-UX 11i v1:

• PHKL_22987: S700_800 11.11 pstat() patch (Use only if your system runs

MeasureWare software)

• PHKL_23154: S700_800 11.11 dflush() patch

• PHKL_25218: S700_800 11.11 PDC Call retry, PDC_SCSI_PARMS, iCOD hang

fix

• PHKL_26232: S700_800 11.11 Psets Enablement patch, FSS iCOD patch

• PHKL_30197: S700_800 11.11 Psets & vPar, Reboot hangs, serial number

• PHCO_24396: S700_800 11.11 /etc/default/tz patch

• PHCO_24477: S700_800 11.11 sar (1M) patch

• PHCO_29832: S700_800 11.11 reboot(1M) patch

• PHCO_29833: S700_800 11.11 killall(1M) patch

IMPORTANT: For the most recent required patches, see the Instant Capacity Installation page on

the HP Software Depot (search for “B9073BA”):

http://www.hp.com/go/softwaredepot

HP-UX 11i v2 Requirements and Dependent Products

The following software is required for Instant Capacity version 10.x on HP-UX 11i v2:

• HP-UX 11i v2

• iCAP software bundle B9073BA (version 10.x) — On the 11i v2 Applications Software media,

or download the most recent version from the HP Software Depot at http://www.hp.com/go/

softwaredepot.

• The kernel configuration must include the diag2 module.

• WBEM B8465BA bundle (version A.02.05 or higher)

• nParProvider bundle (version B.23.01.06.02 or higher, available from the OE media)