Interface Card OL* Support Guide

Figure 2-9 I/O Tree Tab in pdweb Image
The information presented in this tab is derived from the last execution of ioscan cached on
the host system. It is read-only and can only be refreshed by running a new hardware scan, see
“Refreshing the I/O Tree” (page 38).
NOTE: Devices are determined and displayed by ports responding to the hardware scan. You
cannot determine which devices exist on multifunction (combination) cards.
To view device details, both internal and leaf nodes, click anywhere in the row where the device
appears in the list. The detailed view of the device displays, below the list, presenting all available
information about the selected device. The information displayed varies for each device because
this data is dependent on the information retrieved during the hardware scan. See Figure 2-10
(page 36).
Navigating pdweb 35