HP-UX 11i v3 International Printing Features

31
rm=right-margin
pm=page-margin
cpi=char-per-
inch
Specifies the number of printed narrow characters per inch.
hmi=hmotion-
index
Specifies the horizontal motion index of a character. The unit of the
index is 1/120 inch. The value can be wider or narrower than the
value specified in the cpi parameter. In that case, the character is
printed further apart or closer together. Its default value is the same
as the cpi parameter in 1/120 inch unit.
lines=lines
length=lines
Specifies the number of lines per page.
lpi=lines-per-
inch
Specifies the number of lines per inch.
nofixwh
nf
Specifies that width-to-height aspect ratio of the printed characters is
allowed to change according to the specified cpi/lpi and related
options. By default, the aspect ratio remains the same, which results
in the addition of extra padding spaces between characters or
between lines.
vmi=vmotion-
index
Specifies the vertical motion index value which determines the height
of a line. The unit of the index is 1/48 inch. This is equivalent to 48
÷ lines-per-inch.
Character size and
line spacing
width=width
Specifies the width of the page in columns.
even
Prints only the even pages.
odd
Prints only the odd pages.
pages=m:n
Specifies the range of pages to be printed. Starting with the page
number m and ending at page number n inclusively.
Page printing
control
pn
Prints page number in the lower left corner of the page.
land
landscape
Prints in landscape mode; that is, the printed output is parallel to the
long side of the page.
Orientation
port
portrait
Prints in portrait mode; that is, the printed output is parallel to the
short side of the page.
indent=indent
Specifies the amount of indentation in columns (default = 0).
italic
Prints nroff format underlined characters in italic font, if available.
prtctrl
Prints control characters and suppresses page break.
roman
Causes the use of local Roman character set (JIS Roman for Japanese
and ISO646-KR for Korean) when printing ASCII character in a
Japanese or Korean locale except for Unicode text file.
textcolor=color
Specifies the color of the output text for a color printer. The currently
supported colors include black, red, green, blue, yellow, magenta,
and cyan.
vprint
Specifies vertical writing mode for Chinese, Japanese, and Korean
multibyte characters. When this option is activated, multibyte CJK
characters are printed vertically in a rotated orientation; however,
other single-byte characters in the text are still printed horizontally.
Miscellaneous
character
formatting &
control
[no]wrap
Enables/disables line wrapping (default = nowrap).
Table 10: Built-in Text and Postscript Psfontpf -o User Options
Feature Options Description
code=codeset
Specifies the codeset of input text file. This option should only be
used if the given codeset is not supported by an existing locale