HP-UX 11i v3 Installation and Update Guide, September 2009 (Update 5 Release)

Updating to HP-UX 11i v3 using the terminal user interface
This section describes how to update your system using the update-ux Terminal User
Interface (TUI).
There are seven steps in the TUI update-ux process:
Step 1: Start-up
Start the update-ux TUI.
Step 2: Select source Provide the location of the software depot from
which the software will be installed.
Step 3: Select OE Select the OE to which you want to update.
Step 4: Select software Choose the software in the OE you want to
include in your update.
Step 5: Analysis (preview) Analyze (preview) your update selections to
determine if they can be updated successfully.
Step 6: Update Perform the actual software update.
Step 7: Verify update Verify that the software update was successful.
TIP: With this TUI, you use the Arrow, Tab, Space, and Return keys to navigate.
Step 1: Start-up
a. To start the TUI for an update session, enter:
update-ux -i -s /dvdrom
The TUI is automatically invoked and the Update-UX Overview tab appears. If
any screen other than the Overview tab appears, press 1 to display the Overview
tab. This tab provides an overview of the update process. Follow the numbered
tabs to update the OE.
Use the navigation legend at the bottom of each screen to navigate and select
options on this TUI.
Proceeding with updating 63