HP-UX 11i v3 Installation and Update Guide, September 2007 (Update 1 Release)

Network Data Collection Table
Table 5-2 provides HP-UX commands that you can use after the install to confirm
specific information.
Table 5-2 Network Data
HP-UX Command to Confirm Data After
System is Up and Running
Your Specific DataType of Data
uname -n/hostname
Host Name
nslookup hostname
Host IP Address
grep SUBNET_MASK
/etc/rc.config.d/netconf
Subnet Mask
grep ROUTE_GATEWAY
/etc/rc.config.d/netconf
Default Gateway IP Address
cat /etc/resolv.conf
Domain Name
cat /etc/resolv.conf
DNS IP Address
grep NIS_DOMAIN
/etc/rc.config.d/namesvrs
NIS Domain Name
72 Cold-Installing HP-UX 11i v3 From Media