HP-UX 11i v3 Installation and Update Guide, September 2007 (Update 1 Release)

Selecting Your Security Levels at Install Time
During installation, you can configure your security levels by navigating to the System
tab from the Ignite-UX Graphical User Interface Installation and Configuration dialog
box. The System tab allows you to configure information unique to your system such
as security levels, hostname, IP address, root password, and the time zone.
For ease of use, HP recommends using the System tab to select the security level
appropriate for your deployment as described below.
1. Do one of the following:
• If you are using the Ignite-UX GUI, navigate to the System tab (from the
Ignite-UX Installation and Configuration dialog box) and select Security
Choices.
• If you are using the Ignite Install HP-UX Wizard, navigate to the Additional
Software screen and select Security Choices.
The four security levels appear. By default, Sec00Tools is selected.
2. Select the security level appropriate for your deployment. See “Predefined Security
Levels” (page 41) for more information.
3. Select OK.
42 Choosing an Installation Method