HP-UX 11i v3 Installation and Update Guide, September 2007 (Update 1 Release)

Supported Systems
For a list of HP 9000 and HP Integrity systems that this release of HP-UX 11i v3 fully
supports, refer to HP Server Support Matrix at the following website:
http://www.hp.com/go/hpuxservermatrix
NOTE: HP-UX 11i v3 is not supported on workstations. HP recommends that PA-RISC
workstation users use HP-UX 11i v1, and Itanium®-based workstation users use HP-UX
11i v2. Further information about HP workstations can be found at the following
website:
http://hp.com/go/workstations.
Additional information regarding HP servers can be found at the following websites:
• HP BladeSystem: http://www.hp.com/go/blades
• HP 9000 Server Family: http://www.hp.com/go/hp9000
• HP Integrity Server Family: http://www.hp.com/go/integrity
Additional hardware documentation can be found at the following website:
• Enterprise Servers, Workstations, and Systems Hardware:
http://www.docs.hp.com/en/hw.html
26 System Requirements for Cold-Installing and Updating