HP-UX 11i v3 Installation and Update Guide, March 2009 (Update 4 Release)

automatically selected as part of the OE. You can, however, manually deselect
the bundles before you install or update your system.
• Optional: Any software bundles in this category that match software currently
installed on the target system will automatically be selected by default. You
can manually select or deselect these bundles before you install or update
your system.
2. Press the Spacebar to select the OE you want to update; then select n (next) to
confirm your selection and proceed to the Software Selection tab.
The system displays the message: Working...Loading *temporary* update
tools that do not affect the running system and will be
removed when the OE update is finished.
Step 4: Select Software
The Software Selection tab appears. The Software Selection tab displays the software
contents of the OE you selected on the OE Selection tab. On this tab you can adjust the
software contents you want to include within the OE.
You can select or deselect optional software or deselect recommended software you
do not want to update. Deselecting recommended software will deselect standalone
software, network and storage drivers, and recommended software that is common to
all operating environments.
Figure 6-5 Software Selection Tab
88 Updating to HP-UX 11i v3