HP-UX 11i v3 Installation and Update Guide, March 2009 (Update 4 Release)

With the TUI, you use the Arrow, Tab, Space, and Return keys to navigate.
There are seven steps in the TUI update-ux process:
Table 6-2 TUI update-ux Steps
Start the update-ux TUI.
1. Start-Up
Provide the location of the software depot from which the software will
be installed.
2. Select Source
Select the OE that you wish to update to.3. Select OE
Choose the software in the OE you selected to update.4. Select Software
Analyze (preview) the update selections to determine if the selected
software can be updated successfully.
5. Analysis (Preview)
Perform the actual software update.6. Update
Verify that the software update was successful.7. Verify Update
Step 1: Start-Up
1. To start the TUI for an update session, type:
update-ux -i -s /dvdrom
The TUI is automatically invoked and the Update-UX Overview tab appears. If
any screen other than the Overview tab appears, press 1 to display the Overview
tab. This tab provides an overview of the update process. Follow the numbered
tabs to update the OE.
Use the navigation legend at the bottom of each screen to navigate and select
options on this terminal interface.
84 Updating to HP-UX 11i v3