HP-UX 11i v3 Installation and Update Guide, March 2009 (Update 4 Release)

Task 2: Verifying the Installed Software
You can verify that all software was successfully installed on your system by typing
the following command:
/usr/sbin/swverify \*
The message “Verification succeeded” should be displayed on the console at the end
of the operation. Further messages from the verification process can be found in the
log files: /var/adm/sw/swverify.log and /var/adm/sw/swagent.log
Backing Up the System
Now that you have a solid system configuration, you need to back it up. This provides
you with a stable configuration that you can use to rebuild the system, if necessary.
For more information, see “Backing Up Your System” (page 56).
The Next Step
Now that you have installed or updated your system and have all the HP applications
that you need, you may want to configure additional hardware or file systems. You
can find many configuration tasks in the HP-UX System Administrator’s Guide (http://
www.docs.hp.com/en/oshpux11iv3.html#System%20Administration).
104 Verifying System Install or Update