HP Management Platform Synchronization Installation and Reference Manual

Installing and Configuring MPS
20
3-5 MPS settings
Figure 3-9 Management Platform Synchronizer Settings
Table 3-2 Management Platform Synchronizer Settings
Parameter Meaning Default
setting
openIncidentTimeoutDays Defines when MPS should automatically close or acknowledge
incidents after their last change. Incidents are automatically
closed after a specified number in days.
NOTE: If the number is 0, incidents will not be closed
automatically
0
ovo_svr.https Defines if MPS should communicate with OVO’s Web service by
https or by http. Typically, on HP-UX OVO’s configured Web
service the port for https is 8444, for http the port is 8081
True: Use https
False: Use http
IMPORTANT: Select the same protocol for the ports that you
configured in section
3.2.
True
errorOnNodeMissing Defines if MPS should generate an error message in OVO for
every incident that is associated with a device that is not in
OVO’s node bank.
True: Error messages are generated
False: No error messages generated
True
ackMsgOnRegistrationSuccess Defines if MPS should generate an OVO message to indicate a
successful device registration.
True: Incidents are automatically acknowledged
False: Incidents require manual acknowledgement from an
OVO administrator
False