HP Management Platform Synchronization Installation and Reference Manual

Installing and Configuring MPS
15
3 Installing and Configuring MPS
This chapter describes the procedures for installing, configuring and verifying installation of the MPS
software on the CMS.
A summary of the installation process for MPS can be described in three steps
1. Install the Multivendor and Application Adapter (MVAA) with the Remote Support Software
Manager (RSSWM) on the CMS (Refer to section 3-1 )
2. Configure OVO with MVAA (Refer to section 0)
3. Start the MPS Service in Windows (Refer to section Error! Reference source not found.)
3-1 Using the RSSWM and the Installer
To use the RSSWM and the Installer:
1. Log on to Central Management Server with administrator rights.
2. Click on the Remote Support Software Manager icon.
3. Wait for the RSSWM to read the installed packages.
4. Scroll down the packages list and look for the compulsory packages which are not installed.
NOTE: All compulsory packages have to be installed before the Management Platform
Synchronizer installation can start.
Figure 3-1 Packages not installed
5. After all required packages have been installed, click Install on the Management Platform
Synchronizer row. Allow several minutes for the installer to complete installation.