scsimgr SCSI Management and Diagnostics utility on HP-UX 11i v3 (March 2008)

2
1
Target id: 0
Lunid: 0
WWID:
0x0004cffffebbf737
Server S
HBA: 0/1/1/0
2
1
Target id: 0
Lunid: 0
WWID:
0x0004cffffebbe43e
Server S
HBA: 0/1/1/0
Initial Configuration
After reconfiguration
The above diagram shows a disk connected to Server S via parallel SCSI and through the HBA with
hardware path: 0/1/1/0. This disk is assigned the instance 15 by the system. Its target identifier is:
0x0, its LUN identifier is: 0x0, and its WWID is: 0x0004cffffebbf737. The disk has one lunpath:
0/1/1/0.0x0.0x0. The following output of the ioscan command shows information about disk15
# ioscan -kfnNCdisk
Class I H/W Path Driver S/W State H/W Type Description
===================================================================
disk 13 64000/0xfa00/0x2 esdisk CLAIMED DEVICE TEAC DV-28E-B
/dev/disk/disk17 /dev/rdisk/disk17
disk 14 64000/0xfa00/0x3 esdisk CLAIMED DEVICE SEAGATE ST39103FC
/dev/disk/disk18 /dev/rdisk/disk18
disk 15 64000/0xfa00/0x0 esdisk CLAIMED DEVICE HP 36.4GST336706LC
/dev/disk/disk15 /dev/rdisk/disk15
disk15 hardware path, lunpaths and DSFs:
# ioscan -m lun /dev/rdisk/disk15
Class I Lun H/W Path Driver S/W State H/W Type Health Description
======================================================================
disk 15 64000/0xfa00/0x0 esdisk CLAIMED DEVICE online HP 36.4GST336706LC
29