Interface Card OL* Support Guide

6. Click Done to return to the main pdweb screen.
Configuring an I/O Chassis During Dynamic nPartition Operations
To add an I/O chassis to a cell, follow these steps:
1. Click Add Chassis Online.
The Add Chassis Online page appears.
Figure 2-28 pdweb Adding I/O Chassis Card Example
2. Select the Hardware Path of the Cell to which the I/O chassis is being added.
3. Click the Add Chassis button.
The I/O Chassis will be added to the selected cell hardware path and the pdweb main screen
is displayed.
Turning the Attention LED to BLINK or OFF
You can control the amber Attention LED of a slot by setting it to BLINKing or OFF, to help
physically locate a slot. The slot does not need to be occupied to use this feature.
In addition to the amber Attention LED, each slot has a green power LED that indicates the
power state of the slot. It is important to recognize the functional differences of these two LEDs.
The following table lists the states of the amber Attention LED.
56 The pdweb Peripheral Device Tool Web Interface