Interface Card OL* Support Guide

Click any other button to return to the OLRAD Cards tab and leave the state of the target
slot unchanged.
CAUTION: Do not push the Attention Button on the slot, if one exists. The slot powers on
and the system attempts to bring the card online prematurely.
IMPORTANT: Only replace a card in a slot when the power LED is OFF.
At the system, locate the target slot and confirm that the green power LED is off and the
amber Attention LED is flashing. If either LED is not in the correct state, see “Messages from
pdweb Actions” (page 77).
5. Physically remove the existing card, then install the new card in the target slot.
IMPORTANT: Ensure that the latch is closed firmly. For more information, see
“IMPORTANT” (page 19).
For more information about card installation, see the Host Bus Adapter (HBA) documentation
.
Figure 2-24 pdweb Bring Card Online
50 The pdweb Peripheral Device Tool Web Interface