Interface Card OL* Support Guide

Click any button to return to the OLRAD Cards tab and leave the state of the target slot
unchanged.
Figure 2-20 pdweb Adding a card CRA Step 2 Example
CAUTION: Do not push the Attention Button on the slot, if one exists. The slot powers on
and the system attempts to bring the card online prematurely.
IMPORTANT: Only add a card to a slot when the power LED is OFF.
At the system, locate the target slot and confirm that the green power LED is off and the
amber Attention LED is flashing. If either LED is not in the correct state, see the “Messages
from pdweb Actions” (page 77).
5. Physically install the new card in the target slot.
IMPORTANT: Ensure that the latch is closed firmly. For more information, see
“IMPORTANT” (page 19).
For information about card installation, see the Host Bus Adapter (HBA) documentation.
46 The pdweb Peripheral Device Tool Web Interface