Interface Card OL* Support Guide

IMPORTANT: Do not attempt to physically add a card before beginning the process properly
using pdweb, olrad, or the Attention Button. You are prompted to add the card to the target
slot at the appropriate point in the pdweb process.
To add a card, follow these steps:
1. Select a slot from the list on the OLRAD Cards tab.
2. Click Add Card Online.
The Add Card Online page appears, describing the add procedure. As you follow the steps,
each step is checked off. You can choose to end the procedure at any time, leaving the system
unchanged, by clicking Cancel.
Figure 2-18 pdweb Adding a Card Example
3. To start adding the card, click Run CRA.
A CRA runs on the system and the results are displayed in Step 1 of the Add Card process.
44 The pdweb Peripheral Device Tool Web Interface