HP X.25 Release Notes (5900-1522, December 2011)

Figure 2 Connecting the adapter to the cable connector
You can order this special adapter from CAMI Research Inc. The part-number is 902H. For more
information, see the CAMI Research Inc. Web site at:
http://www.camiresearch.com/hpux
You can also contact CAMI Research Inc. at the following address:
CAMI Research Inc.
ATTN: Christopher E. Strangio
530 Main Street
Suite 2
Acton, MA 01720
USA
Tel: [phone]
Fax: [phone]
e-mail: [e-mail]
NOTE: It may take up to three weeks to ship the adapter.
Defect Fixes in This Version
Table 1 (page 6) lists the problems that have been fixed and incorporated into this release.
Table 1 Defect Fixes
ProblemSR Number
The X.25 PCI card (J3525A) needs to operate at speeds higher than 64 Kbps when used with
a V.35 cable.
QXCR1001006889
When only X.25 LLC2 (XOL) interfaces are configured on the system, the x25init command
with only the -a option fails and returns the following message:
QXCR1001045410
[x25init] Device /dev/nli2zcom is not configured in kernel
CAUSE : sam configuration failed.
ACTION : Check sam configuration.
6 HP X.25 Release Notes