HP-UX 11i v3 Installation and Update Guide, March 2009 (Update 4 Release)

Disk Space Requirements for a Cold-Install
The tables listed below show the amount of disk space allocated for the indicated
partitions during a default cold-install for each Operating Environment. Please note
that in the tables below, the results are from using the bdf( 1M) command; your results
may vary if you use the du( 1) command. In addition, totals are not exact due to
rounding.
Table 2-1 Original OEs on Itanium System
TCOEMCOEEOEFOEPartition
1 GB (29% used)1 GB (29% used)1 GB (30% used)1 GB (29% used)
/
1.75 GB (10%
used)
1.75 GB (10%
used)
1.75 GB (11%
used)
1.75 GB (11%
used)
/stand
4.5 GB (13% used)4.5 GB (16% used)8.5 GB (7% used)8.5 GB (7% used)
/var
4.3 GB (63% used)4.4 GB (63% used)4.4 GB (63%
used)
4.4 GB (63%
used)
/usr
.5 GB (4% used).5 GB (4% used).5 GB (4% used).5 GB (4% used)
/tmp
7.8 GB (59% used)7.2 GB (57% used)7.1 GB (57%
used)
6.8 GB (56%
used)
/opt
104 MB (5% used)104 MB (5% used)112 MB (5%
used)
112 MB (5%
used)
/home
1 GB1 GB1 GB1 GB
/swap
500 MB500 MB500 MB500 MB
Itanium EFI Boot
400 MB400 MB400 MB400 MB
Itanium HP Service
22 GB21 GB25 GB25 GBItanium Total
22 System Requirements for Cold-Installing and Updating