Using HP-UX VLANs (September 2004)

Overview of Installation and Configuration
Allowable Values for HP VLANs
Chapter 234
Allowable Values for HP VLANs
Table 2-2 lists the allowable values for configuring VLANs in the
/etc/rc.config.d/vlanconf file. It describes the parameter functions,
default values, and allowable ranges.
For the format of the /etc/rc.config.d/vlanconf file, refer to
“Configuring VLANs by Editing vlanconf File” in this document.
Table 2-2 Allowable Values for Parameters in vlanconf File
Parameter --
description
Range and
Restrictions
Default Type
VLAN_ID -- VLAN
ID
0 - 4094; unique
within NIC
1 VLAN ID per
VLAN;
None Integer
VLAN_PRIORITY
-- 802.1p priority
for outbound
VLAN frames
0 - 7 0 Integer
VLAN_TOS -- Type
of Service value
0 - 255 0 Integer
VLAN_PRI_OVERR
IDE -- Priority
Override level
CONF_PRI/
IP_HEADER/
CONF_TOS
CONF_PRI Case-sensiti
ve
character
string.
VLAN_TOS_OVERR
IDE -- Type of
service Override
Level
IP_HEADER/
ETHER_HEADE
R/
CONF_TOS/
CONF_PRI
IP_HEADER Case-sensiti
ve
character
string.