Using HP-UX Internet Services (August 2003)

About This Document

This manual describes how to use the HP-UX Internet Services products.

It assumes that the HP-UX 11i v2 operating system software and the

appropriate ﬁles, scripts, and subsets are installed on your system.

Intended Audience

This manual is intended for end users who have experience working on

HP-UX and have access to the HP-UX manpages. It is also helpful to

have knowledge of Transmission Control Protocol/Internet Protocol

(TCP/IP) networking concepts and network conﬁguration; this manual is

not a TCP/IP tutorial.

HP-UX Release Name and Release Identiﬁer

Each HP-UX 11i release has an associated release name and release

identiﬁer. The uname (1) command with the -r option returns the release

identiﬁer. Table 1 shows the releases available for HP-UX 11i.

Table 1 HP-UX 11i Releases

Release

Identiﬁer

Release Name

Supported Processor

Architecture

B.11.11 HP-UX 11i v1 PA-RISC

B.11.20 HP-UX 11i v1.5 Intel Itanium Processor Family

B.11.22 HP-UX 11i v1.6 Intel Itanium Processor Family

B.11.23 HP-UX 11i v2.0 Intel Itanium Processor Family