HyperFabric Release Notes HP-UX 11i v1 and HP-UX 11i v2 April 2010

Table 1-2 Supported Configurations for A6386A HF2 Adapter On PCI (4X)

Maximum Adapters per SystemOLAR Support?HP-UX VersionSupported HP 9000 Systems

2No11.0, 11i v1, 11iv2rp24xx (A400 and A500)

2No11i v1 and 11i v2rp34xx Series

4Yes11i v1 and 11i v2rp44xx Series

2Yes (11iv1 and

later)

11.0, 11i v1 and 11i

rp54xx Series (L Class Servers)

8Yes (11iv1 and

later)

11.0, 11i v1 and 11i

rp7400 (N-Class Series)

8Yes11i v1 and 11i v2rp7410/rp7420 (N-Class Series)

8 (maximum 4 per PCI card cage)Yes11i v1 and 11i v2rp84x0

2No11i v2rx1600 Servers

2No11i v2rx2600 Servers

4Yes11i v2rx4640 Servers

2No11i v2rx56xx Series

8 (maximum 4 per PCI card cage)Yes11i v2rx7620 Series

8 (maximum 4 per PCI card cage)Yes11i v2rx8620 Servers

1No11i v2zx6000 Workstations

2No11.0, 11i v1B1000, B2000, B2600, C3000, C3600,

C3700, J5000, J5600, J6000, J6700 and

J7000 workstations

8 (maximum 4 per PCI card cage)Yes11i v1 and 11i v2Superdome servers

8 (maximum 4 per PCI card cage)Yes11i v2SD64A Servers

Disk Space and Memory Requirements

For proper operation, HyperFabric software versions B.11.11.05.01, B.11.11.05.02, and B.11.23.03.01

require the following disk space and memory:

• A minimum of 512 MB of system memory per adapter.

• 12 MB free disk space.

Compatibility Information and Installation Requirements 11