HP-UX TN3270 R7.11.23.200 Release Notes (Mar 2009)

Compatibility Information and Installation Requirements
The following section lists the installation requirements for the HP-UX TN3270 product.
Installation Requirements
After determining that you have the hardware, software and host requirements for the HP-UX
TN3270 product, you will need to load the HP-UX TN3270 product files as follows:
1. Be sure that you have a CD-ROM drive attached to your system to read the product file.
This drive should be configured on your system with an entry in the /dev directory.
2. Use swinstall to load the HP-UX TN3270 product. Refer to the man pages of the HP-UX
system for instructions on how to do this.
3. Once you have loaded the HP-UX TN3270 product file, you can use the swverify command
to verify that HP-UX TN3270 has been correctly installed.
NOTE: The configuration files for R7 are the same as for R6.
Compatibility Information and Installation Requirements 9