HP-UX TN3270 R7 Administration Guide

Configuring TN3270
Understanding the Configuration Text File Records
Chapter 336
Specify values for name and any desired optional fields as described in
the following list:
name
Specify the name of the TN3270 user. Use 1–20 of any
printable, case-sensitive characters. This value must
match the HP-UX login ID of a user on the TN3270
computer.
You can also set up a default TN3270 user record, using
the name <DEFAULT> (in uppercase letters and
surrounded by angle brackets, as shown). The
<DEFAULT> record allows any HP-UX user to use
TN3270 emulation. If the user's HP-UX login ID does
not match the name field in any user record, TN3270
uses the <DEFAULT> configuration record when the user
starts TN3270 emulation.
host
Specify the name of the host record that describes the
session to be used. Use 1–8 characters from the
following set: A–Z, a–z, 0–9, @, # and $ (characters a–z
are converted to uppercase). This name must match
the name of a host record in this configuration file.
Specify a separate host field for each session that the
user can access (maximum of 10 sessions).
If you do not configure at least one host field, the user
will not be able to use the TN3270 emulation program.
style_file
view_rtm flag - Optional -
change_domain flag - Optional -
Table 3-2 Summary of Parameters (Continued)
Field_name Type Range Req/Opt Default