HP-UX LAN Administrator's Guide (July 2003)

Troubleshooting HP-UX LANDRAFT COPY
100Base-T Checklist
Chapter 452
lanadmin -X speed/duplex nmid/ppa
• Manual setting can be permanently set by modifying the configuration file in
/etc/rc.config.d or by using SAM (recommended way).
• If problems persist: connect the card to a switch or hub that is known to be good.
• If this connection works, contact the HP Response Center with the Switch/Hub
information. This may be an IOP (Interoperability) problem.
• If this connection fails, the card may be bad and may need to be replaced.