HP Fibre Channel Mass Storage Adapters Support Guide, February 2007

Chapter 1

Adapter Overview

A9782A Fibre Channel-Ethernet Combination Card

The HP Fibre Channel component of the HP A9782A Fibre Channel-Ethernet combination card uses the

same driver (FibrChanl-01) as the HP A6826A Fibre Channel adapter. All information about the A6826A

Fibre Channel adapter also applies to the HP Fibre Channel component of the A9782A Fibre

Channel-Ethernet combination card.

For A9782A installation information, see the A9782A & A9784A PCI-X 2 Gigabit Fibre Channel and Gigabit

Ethernet Combination Card Installation Guide at:

http://docs.hp.com/en/netcom.html#Fibre%20Channel

For Fibre Channel Troubleshooting and Maintenance information, see Chapter 3, “Troubleshooting and

Maintenance,” on page 33.

Figure 1-7 A9782A Fibre Channel-Ethernet Combination Card

For supported configurations and firmware requirements specific to the A9782A combination card, see the HP

A9782A & A9784A 2 Gigabit Fibre Channel-Gigabit Ethernet Combination Card Support Matrix at:

http://docs.hp.com/en/netcom.html#Fibre%20Channel

CHANNEL

ACT1Gb

2Gb

FIBRE

1000B-SX

LINK

PCI-X

133 MHz