HP Fibre Channel Mass Storage Adapters Support Guide, February 2007

Chapter 1

Adapter Overview

AB379A PCI-X Dual Port 4 Gb Fibre Channel Adapter

The AB379A is a dual port 4 Gb-capable adapter that operates in PCI 33 MHz/66 MHz and PCI-X 66

MHz/133 MHz/266 MHz bus speeds with a 64-bit bus width. Both ports support Auto-Speed Negotiation, and

are independently capable of 1 Gb, 2 Gb, or 4 Gb data transfer rates. Auto-Speed Negotiation enables each

port to automatically negotiate the highest speed common to the port and the infrastructure connecting the

port.

Use the fcmsutil diagnostic tool to display link speed and other Vital Product Data (VPD) information.

The AB379A dual port adapter supports Online Addition and Replacement (OLAR) on OLAR-capable systems

running HP-UX 11i v1 or 11i v2. OLAR refers to the ability of a PCI card to be replaced (removed or added)

without shutting down and rebooting the system.

The AB379A dual port adapter supports fabric topologies. The direct attach topology is supported using

arbitrated loop topology.

Figure 1-5 AB379A PCI-X Dual Port 4 Gb Fibre Channel Adapter

For supported configurations, firmware requirements and information about supported Fibre Channel

devices, see the HP Fibre Channel Host Bus Adapter Support Matrix at:

http://docs.hp.com/en/netcom.html#Fibre%20Channel