Understanding HP Instant Capacity (iCAP) version 6.x and 7.x Codewords Whitepaper

More memory active than expected
This system has 8 GB of memory without usage rights. However, there is no inactive memory. To
correct this exception, 8 GB of memory must be deactivated. Note: To deactivate memory, a cell
board that contains the memory must be deactivated. In this instance, a cell board plus its memory
would have to be deactivated to have the system be in compliance.
# icod_stat
Software version: B.06.50
System ID: sys1
Serial number: USE1234567
Product number: A6912A
Unique ID: Z3e119df0de85bc9c
System contact e-mail: Not set
From e-mail: Set to the default ('adm')
Asset reporting: on
Exception status: More memory active than expected
Local Hard Partition Information
--------------------------------
Total processors: 8
Intended Active processors: 8
Active processors: 8
Licensed processors that can be activated: 0
Processors that can be activated if licensed: 0
Processors that cannot immediately be activated: 0
Global iCOD Information
-----------------------
iCOD cells: 0
Actual inactive cells: 0
iCOD processors: 0
Actual inactive processors: 0
iCOD Memory: 8.0 GB
Actual inactive Memory: 0.0 GB
Unlicensed processors that must be deactivated: 0
Temporary capacity available: 0 days, 0 hours, 0
minutes
Allocation of iCOD Resources Among Partitions
-------------------------------------------------------------
nPar Inactive Inactive Inactive
ID Cells Memory CPUs nPar Name
==== ======== =========== ======== ======================
0 0 0.0 GB 0 Partition 0 (local)
N/A 0 0.0 GB 0 Unassigned Cells
iCOD Partition Configuration Information
-----------------------------------------------------------------
Intended Actual Compatible
nPar Active Active Total Software
ID CPUs CPUs CPUs Installed nPar Name
==== ======== ====== ===== ========== ======================
0 8 8 8 Yes Partition 0 (local)
24