Read Before Installing or Updating to HP-UX 11i Version 2, October 2003

24
The system will also beep once approximately every 2-3 seconds
with each failure message. Error messages from the repeated X
server failures will cause /var/dt/Xerrors to increase in size.
What to Do
The simple solution is to attach the USB devices then reboot the
system. If a reboot is not convenient, then do the following:
1. Log in remotely.
2. Stop and restart the USB hub daemon using these
commands:
/sbin/init.d/hubd stop
/sbin/init.d/hubd start
The system will detect the USB keyboard and USB mouse
and create the required device files. The next attempt to
start the X server should succeed and the CDE login banner
displays.
3. If the problem persists, go to the ITRC online support center
or contact an HP-UX graphics support specialist.